Sophos L2tp

/ Comments off



Sophos l2tp active directory

  1. Sophos L2tp Vpn Mac
  2. Sophos L2tp Split Tunnel
  3. Sophos L2tp Vpn Windows 10
  4. Sophos L2tp Vpn Setup Windows 10

You want to create a remote access L2TP connection.

Introduction

Sophos L2tp Vpn Mac

To create the L2TP connection, do as follows:

  • Turn on L2TP VPN connections, and specify your settings.
  • Create your L2TP policy.
  • Create a firewall rule to allow inbound VPN traffic.

Create an L2TP connection

  1. Go to VPN > Show VPN settings.
  2. Select the L2TP tab and select Enable L2TP.
  3. Specify the general settings:
    Option
    Description

    Assign IP from

    Enter the IP address range to lease.

    Allow leasing IP address from RADIUS server for L2TP, PPTP, and Sophos Connect client

    This setting is optional.

    Select this if you want to lease IP addresses through RADIUS.

  4. Specify the client information:
    Option
    Description

    Primary DNS server

    Select a DNS server from the drop-down list, or specify the DNS server by selecting Other and typing the server's address.

    Secondary DNS server

    This setting is optional.

    Select a DNS server from the drop-down list, or specify the DNS server by selecting Other and typing the server's address.

    Primary WINS server

    Zoom driver download for windows 10. This setting is optional.

    Enter the IP address of your primary WINS server.

    Secondary WINS server

    This setting is optional.

    Enter the IP address of your secondary WINS server.

  5. Click Add member(s), at the bottom of the page.
  6. Select your users and groups, then click Add.
  7. Click Apply.

You can configure IPsec remote access connections. Users can establish the connection using the Sophos Connect client.

This article provides links to the Configuration Guides for Remote Access via L2TP over IPsec on the Sophos UTM. Remote Access via L2TP over IPsec (UTM 9.6, English) Configuration Guide 2018-12-10 Format: PDF Pages: 27 Size: 1.52 MB Remote Access via L2TP over IPsec (UTM 9, English) Configuration Guide 2013-01-11. L2TP does not connect on ios14 while ios13 and os x 10.13.2 works fine. Posted by pzhang1357 Copy to clipboard. Copied to Clipboard Up vote reply of pzhang1357 Down vote reply of pzhang1357 Posted by pzhang1357 Copy to clipboard. Copied to Clipboard.

Introduction

The Sophos Connect client allows you to enforce advanced security and flexibility settings, such as connecting the tunnel automatically. To configure and establish IPsec remote access connections over the Sophos Connect client, do as follows:

Sophos L2tp Split Tunnel

  • Configure the IPsec remote access connection.
  • Send the configuration file to users.
  • Add a firewall rule.
  • Send the Sophos Connect client to users. Alternatively, users can download it from the user portal.

Users must do as follows:

Sophos L2tp Vpn Windows 10

  • Install the Sophos Connect client on their endpoint devices.
  • Import the configuration file into the client and establish the connection.

Configure IPsec (remote access)

Specify the settings for IPsec remote access connections.

Sophos L2tp Vpn Setup Windows 10

  1. Go to VPN > IPsec (remote access) and click Enable.
  2. Specify the general settings:

    Name

    Setting

    Interface

    Select a WAN port.

    Authentication type

    Specify a preshared key or the local and remote certificates.

    Local ID

    Remote ID

    Specify the IDs if required.

    Allowed users and groups

    Select the users and groups you want to allow.

  3. Specify the client information. The following settings are an example:

    Name

    Setting

    Name

    TestRemoteAccessVPN

    Assign IP from

    192.168.1.11

    192.168.1.254

    DNS server 1

    192.168.1.5

  4. Specify the advanced settings you want and click Apply.

    Name

    Setting

    Permitted network resources (IPv4)

    LAN_10.1.1.0

    Drivers action act nevada e series. DMZ_192.168.2.0

    Send Security Heartbeat through tunnel

    Sends the Security Heartbeat of remote clients through the tunnel.

    Allow users to save username and password

    Users can save their credentials.

  5. Click Export connection.

    The exported tar.gz file contains a .scx file and a .tgb file.

  6. Send the .scx file to users.
  7. Optional To assign a static IP address to a user connecting through the Sophos Connect client, do as follows:
    1. Go to Authentication > Users, and select the user.
    2. On the user's settings page, go down to IPsec remote access, click Enable, and enter an IP address.